VEHICLEINTERIOR
← The Journal
· The VehicleInterior Team

How to Measure Your Boot Space in Litres (and Why It Won't Match the Brochure)

Boot capacity is quoted in litres in most of the world and in cubic feet in the US, where the boot is the trunk. Either way, the figure tells you how much space there is, and it is the first thing people compare when choosing between two cars or deciding whether a pram, a set of golf clubs or a week's luggage will go in. You can measure your own boot with a tape measure in five minutes, and the result is often more useful than the brochure figure because you choose where to measure.

This guide shows where to put the tape, how the Cargo Volume Calculator turns three measurements into litres, and how much the choices you make along the way change the answer.

Three measurements

The calculator treats the boot as a box, so it needs a length, a width and a height, in centimetres:

  • Length: along the floor, from the back of the rear seat (in the position you use it) to the inside of the tailgate or boot lid when closed. If the seat back is reclined or slides, measure where it actually sits.
  • Width: across the floor. Measure between the wheel arches, which is the narrowest point and the width a rigid item has to pass. Note the widest point too.
  • Height: from the floor to the underside of the parcel shelf or load cover if you keep it fitted, or to the roof lining if you take it out. Measure where the tailgate opening is lowest as well, because that is what limits tall items going in.

Then there is the shape factor: a percentage the calculator removes for the parts of a real boot that are not square. Wheel arches, a sloping tailgate, curved trim panels, the angle of the seat back and the recess for a spare wheel all eat into a box shape. Somewhere between 10% and 20% suits most conventional boots; awkward shapes with big arches or a steep tailgate deserve more.

A few habits make the numbers more reliable. Use a rigid steel tape rather than a sewing tape, which sags. Take each measurement in two or three places and use the smaller one, since floors are rarely perfectly flat and side panels bulge. If the boot floor has adjustable height, measure it in the position you actually use. And write the measurements down with a note of what they include (shelf in or out, seats up or down), because a figure without that note is hard to compare later.

Worked example: a small hatchback, seats up

Suppose the floor is 70 cm long, 100 cm between the arches, and 50 cm from floor to parcel shelf. As a perfect box that is 0.35 m³, or 350 litres. With a 15% shape factor, the calculator gives about 298 litres, or 10.5 cubic feet. That is a typical figure for a small hatchback with the shelf in place.

The shape factor is a judgment, so it is worth seeing how much it moves the answer. On the same measurements:

Shape factorUsable volume
0% (a perfect box)350 litres
10%315 litres
15%298 litres
20%280 litres
25%263 litres

The spread from 10% to 20% is 315 to 280 litres. That is the honest uncertainty in a tape-measure estimate, and it is why comparing two cars is fairer when you measure both yourself with the same shape factor than when you compare your own measurement with a brochure.

Where you measure the width matters

If you measure the same boot at its widest point, 115 cm instead of the 100 cm between the arches, the estimate rises to 342 litres, 44 litres more. Neither number is wrong. The widest-point figure describes the space for soft bags that squash into the corners behind the arches; the between-arches figure describes the space for rigid boxes. If you choose the widest point, use a larger shape factor to account for the arches.

Seats folded, and measuring to the roof

Fold the rear seats and the same hatchback has a floor about 150 cm long. Measured to the roof at 75 cm, with a 20% shape factor for the sloping seat backs and the tailgate, the calculator gives about 900 litres (31.8 cubic feet).

Height makes a big difference in an estate. Take a load floor 105 cm long and 105 cm wide with a 12% shape factor. To the load cover at 55 cm it is about 534 litres; to the roof at 80 cm it is about 776 litres, 242 litres more from the same floor. Always note which height a figure uses before comparing it with another.

Why the brochure says something different

Manufacturers measure to a standard method, and the methods differ. A common European method fills the space with rectangular blocks of one litre each and counts how many fit, which ignores small gaps a block cannot reach. Some figures are measured to the parcel shelf or window line, some to the roof; some include an underfloor compartment, some do not. American figures often use a different method again. A tape measure and a shape factor will not reproduce any of those exactly, so:

  • Compare cars using the same method: either all brochure figures from one standard, or all your own measurements.
  • Check the brochure's footnote for "to roof", "to window line" or "including underfloor storage".
  • Measure the opening as well as the volume. A big boot behind a small opening still will not take a large box.

What the calculator does not tell you

The calculator gives a volume. It does not tell you whether a particular item fits, because that depends on its length, width and height against the boot's, not on litres. The guide on whether an item will fit covers that. It also says nothing about weight.

Litres measure space, not load. Every car has a maximum payload, the most it may carry including passengers, printed on the label in the door pillar or in the handbook. Water weighs about a kilogram a litre, so the 298-litre hatchback boot filled with water would hold roughly 298 kg before anyone sat in the car. Paving slabs, tiles, sand, tools and bags of compost reach a payload long before they fill a boot. When the load is heavy:

  • Put the heaviest items on the floor, pushed against the back of the rear seat, not near the tailgate.
  • Use the tie-down rings, a cargo net or a load guard. Anything loose can be thrown forward in a hard stop.
  • Do not stack above the seat backs unless a guard or net is fitted, and keep the rear view clear.
  • Check the tyre pressures in the handbook for a fully laden car.

Measured carefully and read for what it is, a boot volume is a good way to compare cars and plan a trip. Just remember that it answers "how much space", not "how much weight" or "will this fit".

Get new guides by emailOccasional emails. No spam. Unsubscribe anytime.